When the thicknesses of vanes are to be considered in the discharge of a turbine, what will be the area under consideration?

Related MCQs

• In this type of low head turbine, the guide vanes are fixed to the hub of the turbine and are not adjustable. What is this type of turbine called?
• Unit discharge is the discharge through the turbine when the head of the turbine is
• is a axial flow reaction turbines, if vanes are fixed to hub of turbine
• In which of following turbine inlet and outlet blade velocities of vanes are equal?
• In Pelton turbine the ratio of volume available at shaft of turbine and power supplied at the inlet of the turbine is               
• The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
• A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
• The speed ratio of an impulse turbine operating under a head off 400m is 0.46. The p.c.d of turbine wheel is 22.25m then rotational speed, in rpm is
• For a series o curved radial vanes, the work done per second per unit weight is equal to
• Sliding vanes in pumps are held by