The height of a water column equivalent to a pressure of 0.15 MPa is

Related MCQs

• The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
• The discharge through a wholly drowned orifice is given by (where H1 = Height of water (on the upstream side) above the top of the orifice, H2 = Height of water (on the downstream side) above the bottom of the orifice, and H = Difference between two water levels on either side of the orifice)
• A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid)
• The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid)
• If mercury in a barometer is replaced by water, the height of 3.75 cm of mercury will be following cm of water
• Gauge pressure at a point is equal to the absolute pressure __________ the atmospheric pressure.
• The height of a column in a pump is called as               
• A quantity of fluid that leaks from a higher pressure discharge to a lower pressure discharge is called            
• The pressure at the exit of runner of reaction turbine is generally than atmospheric pressure
• The total pressure on a plane surface inclined at an angle 9 with the horizontal is equal to (where p is pressure intensity at centroid of area and A is area of plane surface.)