Let the disturbing mass be 100 kg and the radius of rotation be 10 cm and the rotation speed be 50 rad/s, then calculate the centrifugal force in kN.

Related MCQs

• Let the disturbing mass be 50 Kg, with radius of rotation = 0.1m, if one of the balancing mass is 30 Kg at a radius of rotation 0.1m then find the other balancing mass situated at a distance of 0.2m.
• Let the disturbing mass be 200 kg and the radius of rotation be 20 cm and the rotation speed be 50 rad/s, then calculate the centripetal force in kN.
• Let the centrifugal force in kN be 25 and the radius of rotation be 20 cm and the rotation speed be 50 rad/s, then calculate the mass defect in Kg.
• From the given data, calculate the unbalanced centrifugal force in N s2 Distance from shaft = 0.2 m Mass = 100 kg Rotating speed = 1000 rpm.
• A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 11.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 23 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in Newtons?
• A V-twin engine has the cylinder axes at 90 degrees and the connecting rods operate a common crank. The reciprocating mass per cylinder is 34.5 kg and the crank radius is 7.5 cm. The length of the connecting rod is 0.3 m. If the engine is rotating at the speed is 500 r.p.m. What is the value of maximum resultant secondary force in kN?
• In a revolving rotor, the centrifugal force remains balanced as long as the centre of the mass of the rotor lies ___________
• In a gearing system, pump speed is one third of the motor. Shaft from motor is 6 cm in diameter and 30cm long, the impellar shaft is 10cm diameter and 60cm long. Mass moment of inertia is 1500 Kgm2, C = 80Gn/m2. Neglecting the inertia of shaft and gears calculate the frequency of free torsional vibrations in Hz.
• A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a single node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2