McqMate

Q. |
## In a revolving rotor, the centrifugal force remains balanced as long as the centre of the mass of the rotor lies ___________ |

A. | Below the axis of shaft |

B. | On the axis of the shaft |

C. | Above the axis of shaft |

D. | Away from the axis of shaft |

Answer» B. On the axis of the shaft |

1.7k

0

Do you find this helpful?

13

View all MCQs in

Dynamics of MachineryNo comments yet

- Which of the following statements are associated with complete dynamic balancing of rotating systems? 1. Resultant couple due to all inertia forces is zero. 2. Support reactions due to forces are zero but not due to couples . 3. The system is automatically statically balanced. 4. Centre of masses of the system lies on the axis of rotation.
- In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the type of node vibration.
- In a three rotor system, for the middle rotor, if the stiffness of both the length either side of the rotor is increased to two times what will
- A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a single node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
- A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a two node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
- Let the disturbing mass be 100 kg and the radius of rotation be 10 cm and the rotation speed be 50 rad/s, then calculate the centrifugal force in kN.
- Let the centrifugal force in kN be 25 and the radius of rotation be 20 cm and the rotation speed be 50 rad/s, then calculate the mass defect in Kg.
- From the given data, calculate the unbalanced centrifugal force in N s2 Distance from shaft = 0.2 m Mass = 100 kg Rotating speed = 1000 rpm.
- Let the disturbing mass be 50 Kg, with radius of rotation = 0.1m, if one of the balancing mass is 30 Kg at a radius of rotation 0.1m then find the other balancing mass situated at a distance of 0.2m.
- In a gearing system, pump speed is one third of the motor. Shaft from motor is 6 cm in diameter and 30cm long, the impellar shaft is 10cm diameter and 60cm long. Mass moment of inertia is 1500 Kgm2, C = 80Gn/m2. Neglecting the inertia of shaft and gears calculate the frequency of free torsional vibrations in Hz.