All type of stresses vanishes after as soon as the applied load is removed.

Related MCQs

• Residual stresses are always added in the load stresses and hence are always harmful.
• Cotter joint is used when the members are subjected to which type of stresses?
• Which stress comes when there is an eccentric load applied?
• Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing.
• Arrange the bolts in order of decreasing shear stresses.
• The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses.
• If spring index=2.5, what can be concluded about stresses in the wire?
• The safe stress for a hollow steel column which carries an axial load of 2100 kN is 125 MN/m2. if the external diameter of the column is 30cm, what will be the internal diameter?
• 1816mm and radius of centroidal axis is 100mm, then find the bending stress at inner fibre whose radius is 50mm. Area of cross section of beam is 7200mm² and the beam is loaded with 100kN of load.
• Two steel rods connected by cotter joint are subjected to 50 kN load each. What is the minimum diameter required of the rods? (Given: Yielding Stress= 400N/mm² ; Factor of Safety=6)