Which of the following surfaces will give highest rolling resistance for a rubber tyred vehicle?

Related MCQs

• A tractor whose weight is 20 tonnes has a drawbar pull of 2500 kg, when operated on a level road having a rolling resistance of 30 kg per tonne. If this tractor is operated on a level road having a rolling resistance of 40 kg per tonne, then the drawbar pull of the tractor will
• If the gross vehicle weight of a truck is 30 tonne and rolling resistance is 30 kg/tonne, then the tractive effort required to keep the truck moving at a uniform speed is
• Rolling resistance of a wheel depends upon (i) Vehicle load (ii) Grade (iii) Ground conditions Of these statements
• A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be
• Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors?
• The maximum rimpull in the first gear of a tractor while towing a load is 6300 kg. The tractor weighs 12.5 tonnes and is operating along a 2 percent upgrade and the rolling resistance is 45 kg/tonne. Pull available for towing the load is
• The basic action involved in sheep foot rolling is
• The grade resistance factor for an earth moving machine can be obtained by multiplying grade percentage by a factor approximately equal to
• Which of the following does not represent an activity?
• For which of the following materials, the output of power shovels for a fixed shovel size will be maximum