Whenever a liquid (such as water, oil etc.) is filled in a vessel, it exerts force at all points on the sides and bottom of the container. This force per unit area is called

Related MCQs

• When orifice discharge the liquid in to some other vessel containing the liquid, and the outlet is partially under liquid the orifice is called
• When orifice discharge the liquid into some other vessel containing the liquid, and the outlet is completely submerged, the orifice is called
• Pressure of liquid per unit area is called
• Tensile force acting on the free surface of a liquid per unit length is called ___________.
• A simple manometer containing mercury is used to measure pressure of oil (sp. gr. 0.8) flowing in a pipe as shown below. Mercury level in open tube is 150 mm higher than that on left limb. If height of oil in left limb is 90 mm, determine the pressure in terms of head of water in a pipe.
• An opening in a tank or vessel through which the liquid flows out is known as
• The air surrounding the earth Possess some weight. Due to its weight, the air exerts some pressure on the surface of the earth. This pressure is known as
• A water tank contains 1.5 m deep water. Find pressure exerted by water per metre length of the tank.
• A swimming pool having one side 10 m long, is filled with water up to 3.6 m depth. Find total pressure on the wall of the pool
• Liquid is flowing through 200 mm diameter tube with mean velocity of 2 m/sec. If density of liquid is 912 kg/m3 and viscosity is0.38 N.S/m2 find type of flow.