A forward voltage can be applied to an SCR after its:

Related MCQs

• A single-phase voltage controller, using one SCR in anti parallel with a diode, feeds a load R and Vs = 230 V. For a firing angel of 90° for the SCR, the PMMC voltage connected across R would read
• When an SCR is in forward blocking mode, the applied voltage
• During forward blocking state of SCR, the voltage and current respectively are
• Once SCR starts conducting a forward current, its gate losses control over:
• If the gate voltage of an SCR is removed, then the
• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• A thyristor has its gate current zero. To start conduction the forward voltage must exceed
• A resistor connected across the gate and cathode of an SCR in a circuit increases its
• An SCR can be used
• Assertion (A): A TRIAC is a bidirectional SCR. Reason (R): A TRIAC is a four layers 3 terminal device and can conduct in both directions.