In a fully controlled bridge converter feeding a resistive load the waveshapes of output voltage and output current

Related MCQs

• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• A single phase half wave rectifier is feeding a resistive load. When a = 0, dc output voltage is 127 V. When a = 30°, the dc output voltage will be about
• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is
• In a single phase full wave regulator feeding a resistive load, the average current over one full cycle
• A single phase fully controlled bridge rectifier is fed by a source having inductance. The output voltage during overlap period is
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be
• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• Cuk-converter is better than Buck converter in terms of the output voltage.
• The advantage of using free - wheeling diode in half controlled bridge converter is that
• In a B-2 type full controlled bridge converter