In a single phase full wave regulator feeding a resistive load, the average current over one full cycle

Related MCQs

• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is
• A single phase half wave rectifier is feeding a resistive load. When a = 0, dc output voltage is 127 V. When a = 30°, the dc output voltage will be about
• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be
• In a 3 phase full wave regulator feeding resistance load connected in star, the possible range of firing angle a is
• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• In a fully controlled bridge converter feeding a resistive load the waveshapes of output voltage and output current
• A single phase full wave regulator feeds R-L load. The best gating signal is
• In a 3 phase full converter the average load current is 150 A. The average thyristor current is
• In a single phase full wave regulator, the firing angles in the positive and negative half cycles are generally