The slipping of driving wheels of locomotives on the rail surface causes

Related MCQs

• The load on each axle of a locomotive is 22 tonnes. If the coefficient of friction is 0.2, then the hauling capacity due to 3 pairs of driving wheels will be
• A train is hauled by 4-8-2 locomotive. The number of driving wheels in this locomotive is
• A train is hauled by 2-8-2 locomotive with 22.5 tonnes and on each driving axle. Assuming the coefficient of rail-wheel friction to be 0.25, what would be the hauling capacity of the locomotive?
• If n is length of a rail in metres, the number of sleepers per rail length generally varies from
• Heel divergency, the distance between the running faces of stock rail and gauge face of tongue rail, as recommended for Indian B.G. tracks, is
• The angle between the gauge faces of the stock rail and tongue rail, is called
• Distance between the inner rail and check rail provided on sharp curve, is
• The height of the rail for 52 kg rail section is
• If G is gauge distance and a is crossing, the distance between the nose of acute crossing and nose of obtuse crossing of a rail diamond, measured along the rail not forming the diamond, is
• Which of the following devices is used to transfer the wagons or locomotives to and from parallel tracks without any necessity of shunting?