The overlap of batten plates with the main members in welded connections should be more than

Related MCQs

• When two plates are placed end to end and are joined by two cover plates, the joint is known as
• Compression members composed of two channels back-to-back and separated by a small distance are connected together by riveting so that the minimum slenderness ratio of each member between the connections, does not exceed
• Pitch of tacking rivets, when double angles connected back to back and acting as tension members should not be more than
• Pitch of tacking rivets, when double angles connected back to back and acting as tension members should not be more than
• Water pressure in a 80 cm water main is 10 kg/cm2. The minimum thickness of themetal required for the water main, not to be stressed more than 200 kg/cm2, is
• The minimum edge distance of a rivet line connecting two or more plates, is kept equal to 37 mm plus (where t is the thickness in mm of the thinner outside plate).
• The minimum edge distance of a rivet line connecting two or more plates, is kept equal to 37 mm plus (where t is the thickness in mm of the thinner outside plate).
• The minimum thickness of plates in a steel stack should be
• As per IS : 800, for compression flange, the outstand of flange plates should not exceed
• For steel members not exposed to weather, the thickness of steel should not be less than