The width of the flange of a L-beam, should be less than

Related MCQs

• The width of the flange of a T-beam should be less than
• If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is
• If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
• A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
• An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
• The width of the flange of a T-beam, which may be considered to act effectively with the rib depends upon
• The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
• To have pressure wholly compressive under the base of a retaining wall of width b, the resultant of the weight of the wall and the pressure exerted by the retained, earth should have eccentricity not more than
• A part of the slab may be considered as the flange of the T-beam if
• Minimum spacing between horizontal parallel reinforcement of the same size should not be less than