For initial estimate for a beam design, the width is assumed

Related MCQs

• If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
• If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is
• An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is
• A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
• An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
• For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
• According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is
• The width of the flange of a L-beam, should be less than
• If R and T are rise and tread of a stair spanning horizontally, the steps are supported by a wall on one side and by a stringer beam on the other side, the steps are designed as beams of width
• The width of the rib of a T-beam, is generally kept between