The slenderness ratio of a vertical column of square cross- section of 10 cm side and 500 cm long, is

Related MCQs

• A composite section of R.C.C. column 300mm×300mm in section having 20mm diameter 4 bars, one at each corner. Strength of concrete is 5 N/mm2 and modular ratio Es/Ec=9. Calculate load taken by column.
• During a tensile test on a specimen of 1 cm cross-section, maximum load observed was 8 tonnes and area of cross-section at neck was 0.5 cm2. Ultimate tensile strength of specimen is
• Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose
• The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 kN/cm2, the permissible maximum crippling load will be
• The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known
• An axial pull of 50 KN is suddenly applied to a steel bar 2 m long and 1000 mm2 in cross-section. If modulus of elasticity is 200 GPa, find strain energy stored in the bar
• Euler's formula states that the buckling load P for a column of length l, both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are I and E respectively, is given by the relation
• A 10 m long mild steel rail section is fixed at 300 K temperature. If temperature increases by 60 K, find stress in rail section if ends are not yielded. Coefficient of thermal expansion is 12×10-6/K.
• Moment of inertia of a square of side 1 unit about an axis through its center of gravity, is .
• The safe stress for a hollow steel column which carries an axial load of 2100 kN is 125 MN/m2. if the external diameter of the column is 30cm, what will be the internal diameter?