for measuring the elongation of specimen on UTM during tensile test is used

Related MCQs

• during tensile test, if gauge length                   percentage elongation increases due to localised elongation
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• during the tensile test, the length of specimen and its cross section area
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• A tensile test specimen has cross section
• an aluminium tensile test specimen has reduction area of 44%. Its true strain is
• a steel specimen during the test subjected to a stress of 300 N/mm2 and strain 1.5 x 10-3. the modulus of elasticity of steel is
• in tensile test, during strain hardening material after cold working shows                      in strength with decreased toughness
• during tensile test, type of loading should be avoided