a compression test specimen has                         cross section

Related MCQs

• A tensile test specimen has cross section
• during the tensile test, the length of specimen and its cross section area
• in compression test, the top and bottom faces of the specimen on which load is applied should be               
• a concrete specimen of square cross section is subjected to a force of 100 kN. A side of square is 75 mm. if strain in concrete block is 1.5 x 10-3, the value of youngs modulus for concrete is                       
• an aluminium tensile test specimen has reduction area of 44%. Its true strain is
• for measuring the elongation of specimen on UTM during tensile test is used
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• a steel specimen during the test subjected to a stress of 300 N/mm2 and strain 1.5 x 10-3. the modulus of elasticity of steel is