in type of bend test, specimen is held at two points and load is applied at the center

Related MCQs

• in compression test, the top and bottom faces of the specimen on which load is applied should be               
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• for materials having high ductility,                       type of bend test is used
• bend test is also called as                   
• bend test is used to find                    
• the diameter of punch used in cold bend test depends upon                          
• 1800 bend test is also called as                       
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• during the tensile test, the length of specimen and its cross section area