Back fill with a sloping surface exerts a total active pressure Pa on the wall of height H and acts at

Related MCQs

• The total active earth pressure due to dry back fill with no surcharge, acts at H/3 above the base of the wall and is directly proportional to
• A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of
• If the coefficient of the active pressure Ka is 1/3, the coefficient of passive pressure Kp, is
• For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3, C = 2.5 t/m2, the critical height of the slope of the soil, is
• When the seepage pressure becomes equal to the pressure due to submerged weight of a soil, the effective pressure is reduced to zero and the soil particles have a tendency to move up in the direction of flow. This phenomenon is generally known
• If Nf, Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant)
• The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3, is
• In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface
• Rankine's theory of active earth pressure assumes
• According to Coulomb's wedge theory, the active earth pressure slides the wedge