The sum of normal stresses is

Related MCQs

• In the case of biaxial state of normal stresses, the normal stress on 45? plane is equal to
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• If a point in a strained material is subjected to equal normal and tangential stresses, then the angle of obliquity is
• A body is subjected to two normal stresses 20 kN / m2 (tensile) and 10 kN / m2 (compressive) acting perpendicular to each other. The maximum shear stress is
• A piece of steel plate is subjected to perpendicular stresses of 50 Mpa and 30 Mpa both tensile. The normal stress is
• A body is subjected to two normal stresses of 200 kN/m2 (tensile) and 100 kN/m2 (compressive) acting mutually perpendicular to each other. The maximum sher stress is equal to
• When a body is subjected to a direct tensile stress (?) in one plane, then normal stress on an oblique section of the body inclined at an angle ? to the normal of the section is
• A steel rod of length is manufactured at a temperature 200C and its temperature increases upto 1350C.What are thermal stresses induced? E=200Gpa,α=12*10-6/0C
• A steel rod of 3m is manufactured at 250C the temperature of rod is increases to 1250C. If free expansion is 3.6mm, what is the temperature stresses produced if 1.5mm expansion is permitted?
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 2 : 1. The stresses induced in the two rods will be in the ratio ____ _.