Determine the axial force required to engage a cone clutch transmitting 25 kW power at 750 rpm. Average friction diameter of the cone is 400 mm, semicone angle 60 degree and coefficient of friction 0.25.

Related MCQs

• Determine the axial force required to engage a cone clutch transmitting 25 kW power at 750 rpm. Average friction diameter of the cone is 400 mm, semicone angle 10 degree and coefficient of friction 0.25.
• A conical pivot supports a load of 20 kN, and its semicone angle is 41.81 degree. The friction coefficient is 0.06 and shaft runs at 200 rpm. The torque required to overcome friction and power lost in friction is
• Following are the details pertaining to thrust bearing 1) External and internal dia of contacting surfaces-320 mm and 200 mm resp. 2) Axial load-80 kN 3)Pr. Intensity-350 kN/m2 4) shaft speed-400 rpm 5)coefficient of friction-0.06 Calculate power lost in overcoming friction. the frictional torque and power lost in frictional
• A thrust bearing having collars of external and internal diameter as 40 cm and 20 cm respectively, carries an axial load of 3000 N. The co-efficient of friction is 0.09 and shaft runs at 420 rpm. The power lost in friction is to be determined. The corresponding value of friction torque would be ____.
• In a simple band brake applied to a shaft carrying a flywheel of mass 250kg and radius of gyration 350mm , one end of the band is attached to the fulcrum and the other at a distance 300 mm from the fulcrum. The angle embraced by the band is 2250 and the brake drum diameter is 220 mm coefficient of friction 0.25 and the shaft speed is 300 rpm clockwise. Determine the brake torque when a force of 150 N is applied
• A thrust bearing having collars of external and internal diameter as 40 cm and 20 cm respectively, carries an axial load of 3000 N. The co-efficient of friction is 0.09 and shaft runs at 420 rpm. The power lost in friction would be equal to ____.
• A single block brake as shown in Fig.6 has a brake drum diameter of 1m and the angle of contact is 300. It takes 280 Nm torque at 300rpm. The coefficient of friction is 0.35. Determine the required force 'P' to be applied when the rotation of drum is clockwise.
• A multiple clutch with 5 plate transmits torque of 400 N-m. If µ = 0.5 and inner radius = 10 cm and outer radius = 15 cm and four spring expert-axial and load per spring is ___.
• The equivalent coefficient of friction for a cone clutch is ____.
• A flat foot step bearing 225 mm in diameter supports a load of 7500 N. If the co-efficient of friction is 0.09 and the shaft rotates at 60 rpm, calculate the power lost in frictional torque and frictional power in watts with uniform pressure is ___.