An aluminum member is designed based on

Related MCQs

• If the rivet value is 16.8 kN and force in the member is 16.3 kN, then the number of rivets required for the connection of the member to a gusset plate is
• If the rivet value is 2000 N and the force in the member is 2000 N, the number of rivets required for the connection of the member to a gusset plate is
• The effective length of a fillet weld designed to transmit axial load shall not be less than
• Parallel fillet welds are designed for bending strength.
• Transverse fillet welds are designed for
• A tower subjected to load W has self-weight 2W. It is to be designed for constant compressive stress at all sections. The cross-section of the tower should have
• The axial force in the portion AB of the member shown in Fig. 1.1 is kN.
• If the member shown in Fig. 1.1 has a square cross section of 25 mm 25 mm and E = 200 GPa, the change in length of portion AB is              mm.
• The axial force in the portion BC of the member shown in Fig. 1.1 is kN.
• If the member shown in Fig. 1.1 has a square cross section of 25 mm 25 mm and E = 200 GPa, the change in length of portion CD is ------mm