If a bar of length L m extends by l mm under load W, the strain is

Related MCQs

• A bar of length L metres extends by l mm under a tensile force of P. The strain produced in the bar is
• A bar of 30 mm diameter is subjected to an axial force 280 KN length of bar is 400 m and E= 200GPa. Determine volumetric strain if m=4.
• Under uniaxial strain, the ratio of maximum shearing strain to uniaxial strain is
• Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as
• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A prismatic bar of volume V is subjected to a tensile force in longitudinal direction. If Poisson's ratio of the material is u and longitudinal strain is e, then the final volume of the bar becomes
• The tensile force at a distance y from support in a vertical hanging bar of length L whch carries a load P at the bottom is equal to---- where w = weight per unit length
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• …………….Strain is the deformation of the bar per unit length in the direction of force.
• The maximum bending moment of a cantilever beam of length l and carrying a uniformly distributed load of w per unit length lies at the middle of its length.