The velocity ratio of a simple wheel and axle with D and d as the diameters of effort wheel and load axle, is

Related MCQs

• In a single threaded worm and worm wheel, the number of teeth on the worm is 50. The diameter of the effort wheel is 100 mm and that of load drum is 50 mm. The velocity ratio is
• A differential pulley block has larger and smaller diameters of 100 mm and 80 mm respectively. Its velocity ratio is
• In a screw jack, the effort required to lift the load is given by. Where W = Load lifted, ? = Helix angle, and ? = Angle of friction
• The velocity ratio in case of an inclined plane inclined at angle ? to the horizontal and weight being pulled up the inclined plane by vertical effort is
• A weight of 1000 N can be lifted by an effort of 80 N. If the velocity ratio is 20, the machine is
• A body of mass m moving with a constant velocity v strikes another body of same mass m moving with same velocity but in opposite direction. The common velocity of both the bodies after collision is
• In a wormed geared pully block, if the number of teeth one the worm wheel is doubled, then its velocity ratio is also doubled.
• In collision of elastic bodies, the coefficient of restitution is the ratio of the relative velocity after impact to the relative velocity before impact.
• A lifting machine lifts a load of 1000N through a distance of 0.2 m by means of an effort of 200N through a distance of 1m. This machine is an ideal one.
• In a screw jcak, the effort required to lower the load is