The slope of the line joining the crown and edge of the road surface is known as

Related MCQs

• The longest distance at which a driver, whose line of sight is 1.2 m above the road surface, can see the top of an object 10 cm high on the surface of road, is called
• A camber of 1 in 30 means that for a 30 m wide road, the crown of the road will be
• The raising of outer edge of the road above the inner edge is known as
• The distance, measured along the centre line of a road, over which a driver can see the opposite object on the road surface, is called
• The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth level surface. This point of contact will be found to be longitudinally about 25 mm and every piece of stone put into a road which exceeds 25 mm in any of its dimensions is mischievous. This statement is according to Macadam.
• A road within a city or town in called an urban road.
• If the width of cariage way is 10 m and the outer edge is 40 cm higher than the inner edge, then the super-elevation required is
• The inward tilt given to the cross-section of the road surface, throughout the length of the horizontal curve, is known as
• The portion of a road surface, which is used by vehicular traffic, is known as
• Steeper camber may cause deterioration of the central portion of the road surface.