In a canal section, which is in partial filling and partial cutting

Related MCQs

• For a canal which irrigate the area directly, the fall should be provided at a location where the F.S.L. outstrips the gound level, but before the bed of the canal comes into filling.
• The drainage water intercepting the canal can be disposed of by passing the canal below the drainage in
• A canal aligned roughly at right angles to the contours of the country is called ridge canal.
• When the levels are such that the F.S.L. of the canal is much above the bed level of the drainage trough, so that the canal runs under syphonic action under the trough, the structure provided is known as
• To determine the discharge at a section in a stream from its rating curve, the required data are i) slope of water surface at the section ii) stage at the section iii) current meter readings at the section The correct answer is
• The most economical section of a lined canal is
• When the quantity of the earth is much in excess of the quantity required for filling, it has to be deposited in the form of spoil banks. The spoil banks are made on
• If the R.L's of canal bed level and high flood level of drainage are 212.0 m and 210.0 m respectively, then cross drainage work will be
• When the irrigation canal and the drain are at the same level, then the cross drainage work is achieved by providing a
• In a lined canal, the resistance to flow decreases and velocity of flow increases.