Between two rails, a gap of

Related MCQs

• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• If the stock rails are B.H. rails, the type of switch generally provided, is
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• To reduce the wearing of rails, the rails are placed at an
• The rails get out of their original positions due to insufficient expansion gap. This phenomenon is known
• When the rails get out of their original position due to insufficient expansion joint gap, the phenomenon is known as buckling.
• The spread between the point and splice rails at a distance of 4.25 m is 50 cm. The size of the crossing is
• The clear distance between inner faces of rails near their tops is known as