A NOR's gate output is HIGH if

Related Questions

• If ICCH is specified as 1.1 mA when VCC is 5 V and if the gate is in a static (noncharging) HIGH output state, the power dissipation (PD) of the gate is
• If the region beneath the gate is left initially uncharged the gate field must induce a channel before current can flow. Thus the gate voltage enhances the channel current and sucha device is said to operate in the
• The inverter OR-gate and AND gate are called deeision-making elements because they can recognize some input while disregarding others. A gate
• The XOR gate will produce a HIGH output if only one but not both of the inputs is HIGH.
• The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• A logic probe is placed on the output of a gate and the display indicator is dim. A pulser is used on each of the input terminals, but the output indication does not change. What is wrong?
• A three input NOR gate gives logic high output only when
• The output current capability of a single 7400 NAND gate when HIGH is called          
• A gate that could be used to compare two logic levels and provide a HIGH output if they are equal is a(n) .