McqMate
Sign In
Hamberger menu
McqMate
Sign in
Sign up
Home
Forum
Search
Ask a Question
Sign In
McqMate Copyright © 2024
→
Mechanical Engineering
→
Strength of Materials
→
The direct stress induced in a long colu...
Q.
The direct stress induced in a long column is
A.
same
B.
more
C.
less
D.
negligible
Answer» D. negligible
883
0
Do you find this helpful?
10
View all MCQs in
Strength of Materials
Discussion
No comments yet
Login to comment
Related MCQs
If the magnitude of direct stress and bending stress is equal, then there will be zero stress at one of the extreme ends of a column.
When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
When a column is subjected to an eccentric load, the stress induced in the column will be
At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
A body is subjected to a direct tensile stress of 300 Mpa in one plane accompanied by a simple shear stress of 200 Mpa. The maximum normal stress will be
In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
A rail 20 m long is prevented from expansion at both end . If the temperature is raised by 30 0C, Stress induced in rail is.. E=200 Gpa,α =12x10-6/°C
According to Euler's column theory, the crippling load of a column is given by P = ?2 EI / Cl2. In this equation, the value of C for a column with both ends hinged, is
The equivalent length, of a given column with given end conditions, is the length of an equivalent column of the same material and cross-section with hinged ends, and having the value of crippling load equal to that of the given column.