Measure of power consumed by the gate when fully driven by all its inputs is

Related Questions

• The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either
• If the region beneath the gate is left initially uncharged the gate field must induce a channel before current can flow. Thus the gate voltage enhances the channel current and sucha device is said to operate in the
• The inverter OR-gate and AND gate are called deeision-making elements because they can recognize some input while disregarding others. A gate
• Which of the following gates are added to the inputs of the OR gate to convert it to the NAND gate ?
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• If ICCH is specified as 1.1 mA when VCC is 5 V and if the gate is in a static (noncharging) HIGH output state, the power dissipation (PD) of the gate is
• An OR gate has 6 inputs. The number of input words in its truth table are
• How many 74LSTTL logic gates can be driven from a 74TTL gate?
• For the device shown here, let all D inputs be LOW, both S inputs be HIGH, and the input be LOW. What is the status of the Y output?
• The input at the 1, 2, 4, 8 inputs to a 4-line to 16-line decoder with active- low outputs is 1110. As a result, output line 7 is driven LOW.