A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds?

Related MCQs

• A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be
• A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be
• A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was
• A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be
• The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be
• The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by
• A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is
• What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs.
• In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be
• In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be