In synchronous counters the clock input of each of the bistables are connected together so that each changes state at the same time.

Related MCQs

• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• THE FOUR OUTPUTS OF TWO 4-INPUT MULTIPLEXERS, CONNECTED TO FORM A 16-INPUT MULTIPLEXER, ARE CONNECTED TOGETHER THROUGH A 4-INPUT                   GATE
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• We have a digital circuit. Different parts of circuit operate at different clock frequencies (4MHZ, 2MHZ and 1MHZ), but we have a single clock source having a fix clock frequency (4MHZ), we can get help by
• The divide-by-60 counter in digital clock is implemented by using two cascading counters:
• The design and implementation of synchronous counters start from
• If the S and R inputs of the gated S-R latch are connected together using a gate then there is only a single input to the latch. The input is represented by D instead of S or R (A gated D-Latch)
•                  occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay
•                  occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay.
• A bidirectional 4-bit shift register is storing the nibble 1110. Its input is LOW. The nibble 0111 is waiting to be entered on the serial data-input line. After two clock pulses, the shift register is storing .