When the water flows over a rectangular suppressed weir the pressure beneath the nappe is

Related MCQs

• The effect of negative pressure beneath the nappe in case of flow of water over a rectangular suppressed weir is to
• The upper surface of the weir over which water flows is known as
• If 1% error is encountered in the measurement of head over crest of a rectangular weir, the error in discharge will be nearly
• Fresh water 2 m deep flows over the top of 4 m of salt water (S = 1.04). The pressure at the bottom, in kPa, is
• Water flows through a 2 cm dia. Pipe at 20 m/s. It then flows radially outward between two discs, 2 mm apart. When it reaches a radius of 40 cm its velocity, in m/s will be
• Water at 20? C flows in a piping system at a low velocity. At what pressure, in kPa absolute, will cavitation result?
• What flow rate in m3/s, is needed using a 20 : 1 scale model of a dam over which 4m3/s of water flows?
• The head over a 90? V-notch weir increases from 0.15 m to 0.3 m. The ratio of the new discharge to the original discharge is
• In order that the water shall never rise more than 100 cm above the crest for a discharge of 5 cube metres per second, the length of weir will be
• The depth of water in a 3 m wide rectangular, finished concrete channel is 2m. If the slope is 0.001, estimate the flow rate, in m3/s