In order that the water shall never rise more than 100 cm above the crest for a discharge of 5 cube metres per second, the length of weir will be

Related MCQs

• If 1% error is encountered in the measurement of head over crest of a rectangular weir, the error in discharge will be nearly
• An ice-cube is floating in glass of water. As the cube melts the water level
• The head over a 90? V-notch weir increases from 0.15 m to 0.3 m. The ratio of the new discharge to the original discharge is
• A trapezoidal weir of horizontal crest with side slopes of one horizontal to four vertical is called
• If the box in above problem is accelerated in a horizontal direction parallel to a pair of sides at the rate of 1 m/sec2, maximum pressure on the top of the box in metres of water would be
• A mercury water manometer indicates a gauge difference of 400 mm. The difference in pressure, measured in metres of water, is
• When the water flows over a rectangular suppressed weir the pressure beneath the nappe is
• The upper surface of the weir over which water flows is known as
• The effect of negative pressure beneath the nappe in case of flow of water over a rectangular suppressed weir is to
• The pressure in metres of oil (specific gravity 0.85) equivalent to 42.5 m of water is