[Solved] In a bolt the plane of shear

McqMate

Q.	In a bolt the plane of shear
A.	Should be across threaded portion of the shank
B.	Should never be acress threaded portion of the shank
C.	Should be parallel to the axis of bolt
D.	Should be normal so the threaded portion of the shank
E.	None of the above
Answer» B. Should never be acress threaded portion of the shank

1.9k

0

Do you find this helpful?

1

View all MCQs in

Discussion

No comments yet

Related MCQs

A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be
When the bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakege at
A motor weighing 2000 kg is to be lifted by wrought iron eye bolt, screwed into the frame. Clioose-single bolt out of the following
The ratio of maximum shear stress to average shear stress for a circular section is
In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
Neglecting bending, for a parallel load on a fillet weld of equal legs the plane of maximum shear occurs at
For a parallel load on a fillet weld of equal leg the plane of maximum shear occurs
For a transverse load on a fillet weld of equal legs, the plane of maximum shear force occurs at
In a standard coarse thread bolt the stress concentration is maximum at
An eye bolt is generally provided on