In a standard coarse thread bolt the stress concentration is maximum at

Related MCQs

• A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be
• When the bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakege at
• A motor weighing 2000 kg is to be lifted by wrought iron eye bolt, screwed into the frame. Clioose-single bolt out of the following
• If the shearing stress in a nut is equal to half the tensile stress in a bolt then the length of nut should be equal to
• In a gas turbine rotor a radial stress of 300 kg/sq cm tensile and 500 kg/sq cm tangential stress have been found at a point. The maximum shear stress at this point would be
• With a punch for which the maximum crushing stress is 4 times the maximum shearing stress of the plate, the biggest hole that can be punched in the plate would be of diameter equal to
• In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
• The ratio of maximum shear stress to average shear stress for a circular section is
• The stress concentration factor for flat bar in tension with a circular hole, is
• In a bolt the plane of shear