A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be

Related MCQs

• In a cotter joint in order to ensure that cotter does not work back
• When the bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakege at
• A motor weighing 2000 kg is to be lifted by wrought iron eye bolt, screwed into the frame. Clioose-single bolt out of the following
• In case of a cotter joint the compressive load is transmitted from one rod to another rod
• A compressed air cylinder carries approximately 70 kg/cm2 pressure at the time of delivery. The inside diameter is 25 cm. If the steel has a yield point of 2300 kg/sq cm and a safety factor of 2.5 the wall thickness should be
• In elevated circular steel tanks, conical bottoms are attached when
• In elevated circular steel tanks, hemispherical bottoms are preferred because
• If the shearing stress in a nut is equal to half the tensile stress in a bolt then the length of nut should be equal to
• A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range
• The maximum strain at the end of plastic range of structural steel is about