A V-belt having B section is generally used when the power to be transmitted is in the range

Related MCQs

• Approximate horse power that can be transmitted by a shaft 60 mm diameter at 180 r.p.m. with permissible shear stress of 850 kg/cm2, would be
• When power is to be transmitted by two pulleys of different materials, then design will be based on pulley
• The surface hardness that can be obtained by nitriding is generally in the range
• The shape factor of standard rolled beam section varies in the range
• In case of a cotter joint the compressive load is transmitted from one rod to another rod
• The frictional horse power loss in a bearing having 25 mm diameter subjected to a load of 200 kg rotating at 600 rpm will be of the order of
• A section is subjected to reversal of stresses. Choice exists for selecting any of the following section. Which one should be selected?
• The ratio of the area of cross-section of a circular section and the area of its core is
• The type of cam used for low and moderate speed engines is generally
• Self-tapping screws are generally used in