Where a spring with a spring rate that increases with load is desired

Related MCQs

• A spring deflects 50 mm under a 250 kg load. If the load is applied gradually, the energy absorbed by the spring will be
• Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
• When it is desired to transmit a high velocity ratio in a limited space, the device used is
• In door shutters, the type of the spring used is
• Spring index is
• In watches and gramophones, which spring is most commonly used
• Spring stiffness is
• Spring driven watches and clocks utilise
• A close coiled helical spring is compressed. Its wire is subjected to