When it is desired to transmit a high velocity ratio in a limited space, the device used is

Related MCQs

• A single ply leather belt running at a belt velocity of 300 ft/min is likely to transmit per inch of width
• A pair of straight tooth bevel gears connects a pair of shafts at 90?. The velocity ratio is 3:1. The cone ptich angle of the pinion will be
• Where a spring with a spring rate that increases with load is desired
• A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
• What should be the thickness of a cast iron pipe 45 cm diameter if it is required to sustain 6 kg/sq cm inside pressure ? The maximum stress in the pipe material being limited to 140 kg/cm2
• In case of springs in order to achieve greater load carrying capacity when the outer diameter is limited
• A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range
• For maximum horse power transmission in belt drives the velocity of belt left such that the ration tight side driving tension/centrifugal tension is
• If screw threads are to be used in a situation involving high stresses in one direction only, the types of threads suitable for this would be
• The cam used for high speed engines is