The deflection of a helical spring is

Related MCQs

• A close coiled helical spring is compressed. Its wire is subjected to
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
• Where a spring with a spring rate that increases with load is desired
• A spring deflects 50 mm under a 250 kg load. If the load is applied gradually, the energy absorbed by the spring will be
• Operation of helical gears is silent and quiet while the operation of the spur gears is noisy because
• The concentric helical springs are wound in opposite direction
• Helical springs are not subjected to
• A simple supported steel beam when loaded with a force of 100 kg at A is found to deflect 10 mm at B. What force at B would cause a deflection of 2.5 mm at A
• In door shutters, the type of the spring used is
• Spring index is