The buckling load depends on

Related MCQs

• Rinkine-Gordon formula for buckling load is adopted for columns having slenderness ratio between
• A connecting rod in an IC Engine is to be designed against buckling. The end conditions considered are
• The web crippling and web buckling may be prevented by
• A spring deflects 50 mm under a 250 kg load. If the load is applied gradually, the energy absorbed by the spring will be
• Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
• The selection of material for gears depends on
• In case of spur gears, the back lash depends on
• Neglecting bending, for a parallel load on a fillet weld of equal legs the plane of maximum shear occurs at
• Where a spring with a spring rate that increases with load is desired