As viscosity of lubricating oil decreases, bearing load capacity

Related MCQs

• The advantage of needle roller bearing over ball bearing is
• The frictional horse power loss in a bearing having 25 mm diameter subjected to a load of 200 kg rotating at 600 rpm will be of the order of
• The ratio of the plastic moment capacity to the yield moment capacity of a rolled steel beam section is about
• For a circular section the ratio of the plastic moment capacity to the yield moment capacity is
• The ratio of the plastic moment capacity to the yeld moment capacity of a rectangular section is
• In case of springs in order to achieve greater load carrying capacity when the outer diameter is limited
• A spring deflects 50 mm under a 250 kg load. If the load is applied gradually, the energy absorbed by the spring will be
• Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
• In rolling bearings lubricant viscosity