In case of springs in order to achieve greater load carrying capacity when the outer diameter is limited

Related MCQs

• In case the diameter of a shaft is doubled, its torque transmitting capacity will increase by
• The frictional horse power loss in a bearing having 25 mm diameter subjected to a load of 200 kg rotating at 600 rpm will be of the order of
• The concentric helical springs are wound in opposite direction
• Helical springs are not subjected to
• Springs are used
• In the Laminated springs, the flat plates of different lengths are provided for
• Two springs having stiffness are in series. The equivalent stiffness would be
• A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
• What should be the thickness of a cast iron pipe 45 cm diameter if it is required to sustain 6 kg/sq cm inside pressure ? The maximum stress in the pipe material being limited to 140 kg/cm2
• A spherical gas tank is made of 1 cm steel plate hemispheres but welded together. The tank is 1503 cm in diameter. The allowable internal pressure to which tank may be subjected is the permissible stress be limited to 840 kg/sq cm would be in the range