The column bases are mainly subjected to and designed for

Related MCQs

• A shaft subjected to combined bending and torsion can be designed by the following stress theory
• A boiler shell 280 cm diameter and plate thickness 12 mm is subjected to an internal pressure of 1.2 MN/m2. The hoop stress will be
• A spherical metal vessel 120 cm diameter is subjected to an internal pressure of 15 kg/sq cm. If the permissible stress is 625 kg/sq cm and the efficiency of the riveted joints is 75%, the required thickness of the plate would be
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is increased and load reduced to half the deflection at the free end as compared to original deflection would be
• The minor-diameter cross-section of the portion of the screw between the nut and the thrust bearing is subjected to
• In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
• The piston of a internal combustion engine is subjected to
• A close coiled helical spring is compressed. Its wire is subjected to
• Helical springs are not subjected to
• When the bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakege at