When a thin job is to be machined on a shaper, in order to prevent warping, which one of the following steps should be taken first?

Related MCQs

• Warping may be avoided when quenching a long slender piece of work by
• Which is not a part of shaper?
• Size of a shaper is generally specified by
• The usual ratio of forward and return stroke in shaper is
• A work piece of 100 mm diameter is to be machined at a cutting speed of 100 metres per minute. The rpm of the work piece should be
• A thin tube is to be cut by hacksawing. Blades with following TPI are available which blade will be appropriate for the job
• Inside and outside diameters of a thin tube are to be measured. Only one of the following tools is to be selected. Which one would you choose?
• A 30 mm diameter is being machined when the chuck is revolving at 100 rpm. The cutting speed is nearly
• If the rake angle on a HSS lathe tool is 25 degrees the materials being machined is
• Sintered tungsten carbides can be machined by