When a beam having square cross-section is loaded longitudinally, the shear stress develops

Related MCQs

• When a rectangular beam is loaded longitudinally, shear stress develops on
• When a rectangular beam is loaded longitudinally, the shear force develops on the top layer.
• A beam of square cross-section with side 100 mm is placed with one diagonal vertical. If the shear force acting on the section is 10 kN, the maximum shear stress is
• The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
• The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• Slenderness ratio of a 5 m long column hinged at both ends and having a circular crosssection with diameter 160 mm is
• A beam of rectangular cross-section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is
• A shear stress across a plane, is always accompanied by a balancing shear stress across the plane and normal to it.