In the given 4-to-1 multiplexer, if c1 = 0 and c0 = 1 then the output M is                        

Related MCQs

• In 1-to-4 multiplexer, if C1 = 0 & C2 = 1, then the output will be                        
• In 1-to-4 multiplexer, if C1 = 1 & C2 = 1, then the output will be                        
• In a multiplexer the output depends on its
• If enable input is high then the multiplexer is                              
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• If a DAC has a full-scale, or maximum, output of 12 V and accuracy of 0.1%, then the maximum error for any output voltage is ________.
• How many AND gates are required for a 1- to-8 multiplexer?
• What is a multiplexer?
• It is possible for an enable or strobe input to undergo an expansion of two or more MUX ICs to the digital multiplexer with the proficiency of large number of                        
• 6 MULTIPLEXER