In S-R flip-flop, if Q = 0 the output is said to be                        

Related MCQs

• If a DAC has a full-scale, or maximum, output of 12 V and accuracy of 0.1%, then the maximum error for any output voltage is ________.
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• The output of an AND gate is LOW ________.
• The output of a NOT gate is HIGH when ________.
• The output of an OR gate is LOW when ________.
• A logic circuit that provides a HIGH output for both inputs HIGH or both inputs LOW is a(n):
• A logic circuit that provides a HIGH output if one input or the other input, but not both, is HIGH, is a(n):
• In a flash analog-to-digital converter, the output of each comparator is connected to an input of a ________.
• Determine the output frequency for a frequency division circuit that contains 12 flip-flops with an input clock frequency of 20.48 MHz.
• Which of the following is the most widely used alphanumeric code for computer input and output?