A sequence of equally spaced timing pulses may be easily generated by which type of counter circuit?

Related MCQs

• What is the difference between a ring shift counter and a Johnson shift counter?
• A counter circuit is usually constructed of
• The parallel outputs of a counter circuit represent the                            
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• The group of bits 11001 is serially shifted (right-most bit first) into a 5-bit parallel output shift register with an initial state 01110. After three clock pulses, the register contains                  
• A serial in/parallel out, 4-bit shift register initially contains all 1s. The data nibble 0111 is waiting to enter. After four clock pulses, the register contains                  
• A bidirectional 4-bit shift register is storing the nibble 1101. Its input is HIGH. The nibble 1011 is waiting to be entered on the serial data-input line. After three clock pulses, the shift register is storing                  
• How many clock pulses will be required to completely load serially a 5-bit shift register?
• In digital logic, a counter is a device which
• A decimal counter has              states.